All Products

All Products

All Atomic Performance Products

Availability Show all Availability
Price
  • -
Show all Price
Product type Show all Product type
Atomic Barra Heavy Duty Timing Chain Kits Atomic Barra Heavy Duty Timing Chain Kits
from $550.00 AUD
from $550.00 AUD
Our heavy duty timing chain kit comes with everything you need to replace the timing chain system on every type of Barra from stock to 1500hp. It includes detailed instructions on how to install th...
Atomic Barra Billet Oil Pump Rebuild Kit | BIllet Gears, Plate, Seals
$750.00 AUD
$750.00 AUD
Atomic Billet gear oil pump rebuild kit comes with everything you need to rebuild your standard oil pump to be stronger, higher flowing and higher pressure.The kit includes Atomic tight-tolerance b...
Atomic 475 ST Barra Rebuild Kit Atomic 475 ST Barra Rebuild Kit
from $2,475.00 AUD
from $2,475.00 AUD
 Get the parts you need to build a 475 ST just like we do!Phase 1 - Hypertec cast pistons & rings, Atomic 'Superleggera' conrods, ACL Race 180 thrust Main bearings and ACL Race conrod bearings....
Atomic Barra Crank Dowelling Jig Atomic Barra Crank Dowelling Jig
$420.00 AUD
$420.00 AUD
!!!YOU CAN DOWEL YOUR CRANK YOURSELF WITH THE ENGINE IN THE CAR!!!Our doweling jig bolts onto the back of the crank, behind the flywheel or flexplate, perfectly centred using included bolts. You th...
Atomic Barra Heavy Duty Timing Chain Atomic Barra Heavy Duty Timing Chain
$220.00 AUD
$220.00 AUD
Atomic Heavy-Duty Timing Chain – Ford DOHC 6-CylinderEngineered for high-performance Ford Barra and other DOHC 6-cylinder applications, the Atomic Heavy-Duty Timing Chain is a direct-fit upgrade ov...
Atomic Barra Billet Camshafts Atomic Barra Billet Camshafts
$1,485.00 AUD
$1,485.00 AUD
Profile Inlet Duration Exhaust Duration Lift (.050") Notes Standard 248* 248* 10.5mm VCT Stage 2 255° 255° 11 mm | .434" VCT Stage 3 259° 259° 11.5 mm | .451" VCT Stage 4 262° 25...
Atomic SOHC INTECH Tool Steel Headstud Kit
$550.00 AUD
$550.00 AUD
Studs, nuts and washers included along with instructions for installation. 
Head Stud kit, 14.3mm SOHC 6cy
$638.00 AUD
$638.00 AUD
Head Stud kit, Tool Steel SOHC
$550.00 AUD
$550.00 AUD
Cam, EA-EL Turbocycle St.3
$759.00 AUD
$759.00 AUD
Cam, AU Turbocycle St.3
$759.00 AUD
$759.00 AUD
Anti-pump lifter, 14mm SOHC
$390.50 AUD
$390.50 AUD
Atomic Intech SOHC Lifters - 11mm
$363.00 AUD
$363.00 AUD
Ph 2 R/B kit SOHC 698 GTA
$6,600.00 AUD
$6,600.00 AUD
Ph 1 R/B kit SOHC 698 GTA
$4,235.00 AUD
$4,235.00 AUD
Main girdle, EF-AU 10mm
$440.00 AUD
$440.00 AUD
Main girdle, EF-AU 16mm
$550.00 AUD
$550.00 AUD
Brass welsh plug kit, SOHC/DOHC 6cyl
$49.50 AUD
$49.50 AUD
Front Main Seal (Balancer) - Barra & Intech
$66.00 AUD
$66.00 AUD
Rear Main Seal - Barra and Intech
$77.00 AUD
$77.00 AUD
S/Steel MLS Exhaust Manifold Gasket - Barra 6
$55.00 AUD
$55.00 AUD
Intake Plenum Gasket (AU, BA, BF)
$58.30 AUD
$58.30 AUD
Powder Coated Rocker Cover Powder Coated Rocker Cover
from $700.00 AUD
from $700.00 AUD
Atomic rocker covers are custom made to order and lead times are usually 2-3 weeks but can vary. Send your old rocker cover to Atomic after your new cover arrives for store credit towards a future ...
Atomic Barra Manganese Bronze Valve Guides
from $0.00 AUD
from $0.00 AUD
We went to a few suppliers to get the best quality for these manganese bronze valve guides. Made for better valve support at high temp, RPM and load. For those with bigger valves, bigger cams, heav...
Atomic Barra Torrington Bearing Kit Atomic Barra Torrington Bearing Kit
from $350.00 AUD
from $350.00 AUD
The Torrington Thrust Bearing kit is used to help support the crank from being pushed forward by the gearbox. This usually happens from ballooning torque convertors. Heavy clutches, clutch kicks, d...
Atomic Barra Titanium Retainers Set (24) - Barra
$495.00 AUD
$495.00 AUD
Titanium valve spring retainers to suit Ford Barra 6cyl. Standard 1.492"/38.0mm installed height, suits standard or Atomic valves. Lighter alternative to steel retainers which improves the engines ...
Atomic Barra Chromoly Retainers
$363.00 AUD
$363.00 AUD
Atomic Chromoly retainers to suit standard or aftermarket valve springs. Used on nearly every Atomic built engine so they're suitable for most builds. Titanium retainers are also available for thos...
Atomic Barra Race Springs and Titanium Retainers
$968.00 AUD
$968.00 AUD
Race Ovate springs and Titanium retainers suit Ford Barra DOHC 6 cyl, all models. Standard installed height 37.80mm/1.490" sp
Atomic Barra Performance Valvesprings | Stage 1 - 5 Atomic Barra Performance Valvesprings | Stage 1 - 5
from $400.00 AUD
from $400.00 AUD
Atomic Barra performance valve springs come as a set of 24 matched to within +-1lbs spring pressure. These springs range between 80-85lbs pressure at the seat and each box comes marked this number....
Atomic Barra VCT Solenoid Delete Kit - 20mm Atomic Barra VCT Solenoid Delete Kit - 20mm
$145.00 AUD
$145.00 AUD
VCT Solenoid Delete Kit for 20mm VCT solenoids (engines after 05/2005). Includes locking spigots to replace the solenoids and blanking plates.
Resources
Torque Specs
Torque Specs

Torque specs, clearances, preloads etc.

Engine Types
Engine Types

BA? BF? FG? GAS? RED TOP? WTF?
Instructions
Instructions

Installation and setup instructions
Power x Parts Guide
Power x Parts Guide

Content text